StaxRip 1.3.4.0 x64 Stable Portable

Posted by: Bo0mB0om on 18-05-2016, 02:11
See Orignal Post @ Nulled.Org


StaxRip 1.3.4.0 x64 Stable Portable
StaxRip 1.3.4.0 x64 Stable Portable | 90.3 Mb


StaxRip is an advanced tool that uses built-in encoders, decoders, muxers and demuxers to rip movies from DVDs and Blu-ray discs and turn them into other formats which are user-friendly for various devices, like iPhone or Xbox. It solely addresses experienced users.

Apart from DirectX and .NET Framework, you don't need to set up anything else. You can extract StaxRip's files anywhere on the disk and launch its executable file. This is also possible when saving the program to a pen drive to use it on any PC. Unlike most installers, it doesn't modify Windows registry settings.
Select the output profile and customize settings
Wrapped in a classical-looking interface that doesn't put emphasis on appearance, StaxRip helps you get started by specifying an output profile between x264, DivX Plus, iPad, iPhone, PS3, WebM, Xbox 360 and XviD, thanks to the fact that it has optimized settings for these templates. Plus, you can choose the encoding mode by either favoring video quality (greater file size) or file size (poorer quality).
However, this doesn't mean that the application doesn't let you customize each setting. On the contrary, you can apply image filters (e.g. deinterlace, crop borders, noise, resize), set the resolution width and height, as well as select the quality level and targeted device.
Rip movies from various sources
The program is able to rip movies from Blu-ray folders, DVDs or Blu-ray discs using MakeMV, as well as to convert regular videos from files in batch mode (e.g. .avi, .mpg, .mov) or from entire directories with common clips. It can also merge multiple videos into a single file.
The project can be saved to file and resumed later. You can preview media files, add tasks to a queue for batch execution, manage encoders and decoders, muxers and demuxers along with filters, open hardcoded subtitles, as well as modify expert setting regarding the image, audio, subtitles, paths, reminders, filters, compressibility check, and others.
Evaluation and conclusion
CPU and RAM consumption was fair in our tests, and StaxRip carried out conversion tasks swiftly, without triggering the operating system to hang, crash or prompt error dialogs. The main downside of the tool is that it's targeted at advanced users only, since it's not intuitive for beginners. Other than that, it's packed with powerful options dedicated to DVD ripping.
FEATURES
• Easy to use
• Well documented
• Highly versatile and customizable
• Reasonable default values for filters and codecs
• Rich help system including, online help (assistant), context sensitive help
• Bug tracking and support system
• Rich and convenient cutting/trim facilities for tasks like removing ads
• Job list and batch processing
• Required third party applications can be managed, integrated and downloaded easily
• Automatic internet updates
• AviSynth powered for excelent video quality and rich source format support
New in version 1.3.4.0 (April 16, 2016)
New Features:
• support for 3 or more audio tracks added to the muxing dialog
• code preview added to filters menu and script preview renamed to code preview in script editor
• added a command line switch -show-dialogs:bool and project option 'Show all dialogs when invoked from CLI', by default dialogs are not shown when StaxRip receives CLI arguments
• yadifmod2 plugin for AviSynth added
• TComb AviSynth plugin added
• auto crop plugin replaced with new internal routine supporting both AviSynth and VapourSynth
• better subtitle support for m2ts container
• decoding options added for AMD encoder
• larger x265 custom command line TextBox
• x265 new switch added --rc-grain
• the encoding options dialogs for x265, AMD, Intel and NVIDIA have now an option to display the full command line
• new ffmpeg encoder output options 'H.264 NVIDIA', 'H.264 Intel', 'H.265 Intel', the currently used ffmpeg built doesn't yet support NVIDIA
• video encoder profiles added for all encoding codecs StaxRip supports for ffmpeg: 'VP9', 'Xvid', 'ASP', 'Theora', 'H.264 Intel', 'H.265 Intel', 'H.264 NVIDIA'
• ffmpeg decoding option -threads added, multi-threading is enabled by default but not recommended for dxva2 decoding and maybe for hardware decoding in general
• VapourSynth QTGMC parameters TFF and Preset added to menu
• more source and target parameters are now shown in the main dialog
• in the scripting editor there is a Join feature to join all filters into one
• QTGMC 3.33 for AviSynth
• profiles can be saved from the x265/AMD/Intel/NVIDIA/ffmpeg encoding options dialogs
• added shortcuts and Export to CSV to MediaInfo Folder View (Tools > Advanced)
• added C# (Roslyn) and PowerShell scripting support. Scripts can be started at main menu > Tools > Scripts. There are commands in the command line, main menu and event commands to execute script code or script files.
• three VapourSynth filter profiles added based on std.SetFieldBased
• added user contributed script 'Convert Bluray (BT709) to 10bit 400nits (MaxFALL) HDR (rev2)'
• in the options dialog the subtitles to auto load can now be defined with both two and three letter code, this is useful for people more familiar with three letter codes, both can be mixed, for undetermined previously 'iv' had to be used, now 'und' can also be used.
• added setting to scale the UI to a custom factor
• many new switches added to Intel Quick Sync encoding GUI for QSVEncC
• many new switches added to NVIDIA encoding GUI for NVEncC
• added option to set audio default stream
Fixed Bugs:
• fixed window freeze in eac3to dialog happening when eac3to fails on the input.
• fixed showing filter selection dialog even if the source is vpy or avs
• fixed StaxRip trying to auto correct the script even if the source is avs or vpy
• fixed StaxRip recalculating the video bitrate even when the fixed bitrate option is used
• avi muxer supports two audio tracks now
• in some cases the two audio output file paths were identical
• moving subtitles up and down wasn't working correctly
• the new mp4box update should fix a bug many people reported
• fixed editing dates in apps dialog not working with Persian calendar
• fixed crash using ' character in file paths using VapourSynth
• fixed inaccurate right and bottom magnifiers in crop dialog
• fixed Python installed by miniconda not being detected
• cropping values were multiplied by 2 using NVEncC
• fixed subtitle size detection
• fixed preview not fitting on screen under some conditions
• fixed some issues opening avs or vpy as source file
• added new source filter avisource.AVISource for VapourSynth, it can open avi and avs files
• the filter selection dialog has now automatic options for both AviSynth and VapourSynth. For avs sources it shows also an option for VapourSynth since VapourSynth's AVISource can open avs files
• d2vsource added to VapourSynth
• fixed wrong font used pasting code in code editor
in the media info folder view (Tools > Advanced) the context menu functionality did not work for sub folders
in same situations it wasn't possible to close the crop dialog due to an script error, now the message box showing the error has an additional exit button
fixed High DPI scaling bug in the navigation bar of the x265 dialog
in case the audio or subtitle source file is mkv the original stream title was muxed even if it was deleted in StaxRip
line indentation wasn't preserved for multiline filter profiles
Tweaks:
• better error handling when the source is vpy or avs
• when loading an audio file without language info the language of the audio profile/stream stays instead of being changed to undetermined
• improved changelog
• cutting with VapourSynth is now possible without AviSynth being installed (the audio cutting code was using AviSynth)
• The info in the preview looks better and is readable regardless of the current background
• source filter preferences in the settings dialog under Source Filter to configure which source filter should be used for a given file in case the source filter in the project is called Automatic is now also available for VapourSynth, with this VapourSynth support in StaxRip should be on par with AviSynth support making both scripting engines first class citizens
• x265 tune grain defaults updated
• improved bitrate calculation
• The media info dialog shows the file size now also in mega byte instead of giga byte only
• removed ffmpeg writing long build info to the log file
• Video Comparison shows now indexing progress
• added version or at least change date and x86 or x64 to every app in the apps dialog
• set font to Consolas 10 in scripting editor
• the checked list controls of the event command and jobs dialog were replaced with themed controls, in the jobs dialog multi select and Ctrl+A and Delete shortcuts are supported
• besides detecting the python location of the regular setup and miniconda setup StaxRip now also searches in the PATH and Path environment variables for python
Updated Tools:
• AviSynth+ 1841
• AVSMeter 2.2.0
• ffmpeg 2016-03-10
• fmtconv (vs) 20
• mkvtoolnix 9.0.1
• mp4box 0.6.0
• mvtools (vs) v13
• NVEncC 2.05
• QSVEncC 2.45
• x264 2692
• x265 1.9+140
• yadifmod2 (avs) 0.0.3
SYSTEM REQUIREMENTS
• NET FRAMEWORK 4.5
• LAV FILTERS (in archive)
OS: Windows 7 64-bit / 8 64-bit / 10 64-bit

[/center]

DOWNLOAD
(Buy premium account for maximum speed and resumming ability)



We need your support!
Make a donation to help us stay online
        
Bitcoin (BTC)
bc1q08g9d22cxkawsjlf8etuek2pc9n2a3hs4cdrld
	
Bitcoin Cash (BCH)
qqvwexzhvgauxq2apgc4j0ewvcak6hh6lsnzmvtkem

Ethereum (ETH)
0xb55513D2c91A6e3c497621644ec99e206CDaf239

Litecoin (LTC)
ltc1qt6g2trfv9tjs4qj68sqc4uf0ukvc9jpnsyt59u

USDT (ERC20)
0xb55513D2c91A6e3c497621644ec99e206CDaf239

USDT (TRC20)
TYdPNrz7v1P9riWBWZ317oBgJueheGjATm

Dear visitor, you enter the site as unregistered member.
We recommend you to register or log in.
Information
Users of Guest are not allowed to comment this publication.